Command Line
c:\3Dfield\field.exe data1.dat data2.dat
- open data1.dat file as primary series and data2.dat as second series.
c:\3Dfield\field.exe /a array.dat
- open 2D/3D data file.
c:\3Dfield\field.exe picture.jpg
- show picture jpg.
c:\3Dfield\field.exe /m fill_contours /g picture.gif data.dat
- open data.dat file and create picture.gif file.
c:\3Dfield\field.exe /m fill_contours /3dview data.dat
- open data.dat file, create 2D color fill contour map and go to 3D view.
c:\3Dfield\field.exe /g picture.png /h data.dat
- open data.dat file, create picture.png file and exit 3DField without show-up window.
c:\3Dfield\field.exe /b border.brd data.dat
- open data.dat and existed border file.
c:\3Dfield\field.exe /m contours /i contours_values.txt data.dat
- open data.dat file and input the values for contours.
c:\3Dfield\field.exe /i contours_levels.txt /c colors.clr data.dat
- open data.dat file, input the levels for contours and colors.
c:\3Dfield\field.exe /n grid.net data.dat
- open data.dat file and define a grid.
c:\3Dfield\field.exe /m contours /v values.txt /h data.dat
- open data.dat file, save the values of grid created by interpolation to values.txt and
exit 3DField without show-up window.
c:\3Dfield\field.exe /bm basemap.jpg data.dat
- load basemap.jpg file as a base map, displayed in center.
c:\3Dfield\field.exe /bm basemap.jpg /c1 x1 y1 /c2 x2 y2
data.dat
- load basemap.jpg file as a base map. The left top corner of map will
attach to (x1, y1) coordinates, right bottom corner to (x2, y2).
c:\3Dfield\field.exe /bm basemap.jpg /c1 x1 y1 /c2 x2 y2
/p1 px1 py1 /p2 px2 py2 data.dat
- load basemap.jpg file as a base map. The point (px1, py1) will attach to
(x1, y1) coordinates, (px2, py2) to (x2, y2);
where
x, y are a real values (coordinates)
px, py are a integer values (pixels).
c:\3Dfield\field.exe /d lines.txt data.dat
- open data.dat file and the lises files, saved from "Drawings" item.
Options:
/h
- option without GUI interaction (batch mode)
/g file(.gif, .png, .bmp, .jpg, .emf, .wmf)
- result contour map
/b file.brd
- file of border
/c file.clr
- color file
/bm base_map(.jpg, .png, bmp, .gif)
- base map file
/i file.*
- text file of contours levels. { 1.2 1.3 1.5 ...} for example.
/n file.net
- grid dimension file
/noshowcolorbar
- no show color bar
/v file.*
- output values text file
/d lines(.ltx, .txt. .dxf, .gen)
- load a "drawings" file
/m fill_contours or
/m contours or
/m locate_points or
/m color_cells or
/m circle_values or
/m color_relief or
/m shaded
|